If you own a Barnett Jackal and want a crank cocking device for it, here’s the short answer: Barnett never listed one that fits the Jackal, and we couldn’t find a reliable aftermarket crank made for it either. What does work is a good rope cocker, which halves the pull. This page explains why the cranks don’t fit, which rope cockers to buy, how to cock and unload the Jackal safely, and when a crank is worth it.
We haven’t tested these products ourselves. Compatibility information comes from Barnett’s own product pages, past and present. Stock was checked on Amazon on October 4, 2026, and it changes often.
Is there a crank cocking device for the Barnett Jackal?
No. Barnett’s crank cocking devices come with a list of the crossbows they fit, and the Jackal has never been on one. In 2015, while the Jackal was still on sale, Barnett sold two Power Stroke crank devices (for bows with power strokes up to 15 inches, and from 15 to 18 inches). They listed models such as the Quad, Wildcat, Panzer V, Ghost, Buck Commander, Penetrator, Vengeance, Recruit, Razr, Brotherhood, Raptor and BCX, but not the Jackal. Barnett’s crank for the Predator fit only the Predator and Revolution.
The current Barnett Standard Crank Cocking Device doesn’t list the Jackal either. Its list includes the Whitetail Hunter STR, Ghost 410, Ghost 360 and 375, Wildcat C6 and Recruit models. Even the old version of this page said the Jackal couldn’t take a Barnett crank.
Cranks from other brands won’t help. Excalibur’s Charger EXT is made for Excalibur crossbows, TenPoint’s ACUdraw is built into TenPoint and Wicked Ridge stocks, and CenterPoint’s Power Draw fits only CenterPoint stocks with its buffer tube. A crank needs to attach solidly to the stock in exactly the right place, and a poor fit can let a 150 lb string slip. Don’t drill, clamp or improvise a mount.
Rope cockers that work with the Jackal
A rope cocker is a cord with a handle at each end and either two hooks or a sliding sled in the middle. The cord runs behind the stock like a pulley, so you pull about half the draw weight: roughly 75 lb on a 150 lb Jackal. It also pulls both sides of the string evenly, which helps accuracy. Barnett’s own Jackal page didn’t list a cocking aid in the box, so if you don’t have one, it’s the first accessory to buy.
Both of Barnett’s current Premium rope cockers were in stock new on Amazon from third-party sellers, shipped by Amazon:
- Best for most Jackal owners: Barnett Premium Rope Cocking Device (hook). Simple and light.
- Easiest to keep centered: Barnett Premium Rope Cocking Device (sled).
- Only if you upgrade your bow: Barnett Standard Crank Cocking Device. Doesn’t fit the Jackal.
1. Barnett Premium Rope Cocking Device (hook): best for most Jackal owners
This is the classic design: a hook on each side catches the string next to the rail, and you pull both handles together. Barnett says it reduces cocking tension by up to 50%. It has a 50-inch rope and a magnetic lock to keep it tidy when it’s not in use. It folds small enough to keep in a pocket or pack.
It had the best owner feedback of the three. The hooks need to be placed evenly on each side of the rail every time, which takes a little practice.
2. Barnett Premium Rope Cocking Device (sled): easiest to keep centered
Instead of two separate hooks, this version has a sled that rides along the rail and catches the string in the middle. That makes it easier to pull the string back straight, which is the main reason to choose it. Barnett gives the same up to 50% reduction, 50-inch rope and magnetic lock. Barnett says it’s compatible with most crossbows but not the Hyper Raptor. It doesn’t mention the Jackal by name, so check that the sled slides freely on your rail before you pull.
If you’re not sure the sled will clear your rail and scope mount, the hook version is the safer choice for a Jackal.
How to cock a Jackal with a rope cocker
- Check the bow. Make sure there’s no arrow on the rail and the string, cables and limbs look sound.
- Point it down. Rest the front of the bow on the ground, pointing down and away from you, and put your foot all the way into the stirrup.
- Place the rope. Run the cord over the stock behind the trigger, where the manual shows. Then hook the string on each side of the rail, close to the rail. Barnett’s instructions say to keep the hooks facing up.
- Pull evenly. Stand up straight and pull both handles up together, using your legs and back. Keep the handles level so the string comes back square.
- Listen for the latch. The string should lock into the trigger and the safety should engage. Check both sides of the string are seated.
- Remove the cocker, then load. Take the rope off before you load an arrow, and only load when you’re ready to shoot.
If the string sits further back on one side than the other, your shots will drift. Don’t fire. Shoot it off into a target and cock it again more carefully.
How to unload a Jackal safely
A rope cocker can’t let the string down, and you should never try to do it by hand. With a Jackal you have two safe options:
- Shoot it into a target. Load a field-point arrow and shoot into a target or soft ground you’re sure is safe. Many hunters carry one field-point arrow just for this at the end of the day.
- Use a de-cocking bolt. These are heavy, blunt arrows made to be shot into soft ground. Barnett sells its own. Make sure the one you buy matches your bow’s arrow length (20 inches for the Jackal) and nock.
Never let the string down by hand or by holding the string and pulling the trigger. It can slip, hurt you, and damage the bow. And never shoot the bow without an arrow. A dry fire can crack the limbs or wheels.
When a crank makes sense
A crank cuts the effort to a few pounds, some models also let you de-cock without shooting, and it helps hunters with bad shoulders or backs, smaller hunters and young shooters. If a rope cocker isn’t enough for you, the honest fix is a different crossbow that takes a crank, not a homemade adapter for the Jackal. A Jackal is old enough now that it may be due for new strings and cables anyway.
Many current Barnetts work with Barnett’s crank, and some, like the XP370 and Recruit XP, are sold in versions with a crank built into the stock. Our Barnett Jackal owner guide compares four current replacements, and our Barnett crossbow reviews cover the full range.
3. Barnett Standard Crank Cocking Device: only if you upgrade your bow
To be clear: this crank does not fit the Jackal. We include it because it’s the crank Barnett sells for its current bows, and it’s what you’d use if you upgrade. Barnett says it reduces cocking resistance by as much as 93%, so you turn the handle with about 13 lb of force. Its compatibility list includes the Whitetail Hunter STR, Ghost 410, Ghost 360 and 375, Wildcat C6 and Recruit models. Always check the current list for your exact model before you buy.
It was sold out on Barnett’s own store when we checked.
The bottom line
There’s no crank cocking device for the Barnett Jackal, so don’t waste money on one that “should” fit. Buy a Barnett Premium rope cocker, use it with the hooks facing up and an even pull, and unload by shooting into a target or with a de-cocking bolt. If cocking is still a struggle, put the money toward a crossbow that takes a crank.
For more, see our crossbow bolts guide, our owner guides for the Barnett Ghost 410 and the Excalibur Matrix 355, and our best crossbows guide.


